WHAT TO EXPECT

What To Expect When Drilling A Water Well

The water well drilling process can be a daunting and stressful time for many property and landowners. There are many unknowns along the way that often leaves many overwhelmed. We try our best to answer all your questions up front, and will keep all lines of communication open during and after the drilling process has been completed. We conduct business with high levels of transparency and will walk you through each step of the way. For ease of understanding the project timelines, we have broken our water well drilling process down into 6 Phases.

PHASE ONE: DATA COLLECTION

This process often begins with information gathering. We discuss findings and share the information with you. Transparency is KEY!

PHASE TWO: THE DRILLING PROCESS

The drilling process starts with site location and underground line locations before the rig arrives on site. This might mean you have to contact the previous owners to discuss underground lines, septic fields, etc.

Please go to https://www.sask1stcall.com/ for more information.

PHASE THREE: DRILLING

This process involves the site location of the well and ensuring that the site is free of contamination, flooding, sewer lines, power lines, etc. By this time we have a good understanding of the aquifer(s) and have a good idea of the depths that need to be reached.

We drill with the intent of a full functioning well at a depth that was to be deemed appropriate. When we reach the max pre-arranged depth and have not reached a producing seam, we attempt the next viable seam or aquifer as per our discussions. We will check each available seam and choose the first seam or aquifer that produces water and then install casing and screens.

PHASE FOUR: WELL PRODUCTION

We use several methods to develop a well including jetting, surging, back-washing, and over pumping. The final step in well completion is thoroughly cleaning all foreign substances from the well. Usually, disinfecting is accomplished with a chlorine solution, as it is inexpensive, simple, and effective. The concentration of chlorine to be used is based on the volume of water in the well. A pump is installed and gallon(s) per minute are determined. Then, water samples are taken and sent for testing.

PHASE FIVE: WATER INFRASTRUCTURE

In this phase, we install well cribbing, water lines and electrical wire from the well trenched to the house. We'll install a pressure pump, manifold, and pitless adapter. Optionally a hydrant will be installed.

PHASE SIX: WATER TREATMENT

After water testing is completed by another outside agency, a water system may be recommended by the outside agency. We install water systems and help you to understand how it works and what maintenance it needs.

WHEN IT’S ALL DONE - WILL THERE BE A MESS?

This is the awkward part of the process. Yes, there is always a mess - Definitely during the drilling process - and after when the installation is complete. While we try to do our best, the only question will be how big the mess is. The damage to your yard, lawn and surrounding area will vary. Site clean-up is the property owner’s responsibility. Everything from ensuring the access route, the desired drill location is firm and free from obstruction and adequate drainage around the site does help. Our drilling equipment is large and heavy. It is important to understand this as well when you are planning the location of your well. Sending us pics ahead of time may help us - help you to prep the area for optimal results.

Our commitment to you is that we will guide you through each step of the process.

Book now for the 2022 & 2023 seasons. Limited Availability.